Part Number: AIC10
Key Features
-Intuitive digital user interface
-Optional shutter control
(iris requires high-speed shutter attachment)
-RS232 or TTL level signal control
-RoHS Compliant
What’s Included
-AIC10 Iris Controller
-Manual (included on flash drive)
-10C3 iris/shutter interconnect cable (3.0 m)
-USB-AB Cable (1.0 m)
-PS12 Power Supply w/ US & Euro line cords
→ 상품 상세 정보 : AIC10 Iris Controller
Overview
The AIC10 is a tabletop motorized iris diaphragm (auto iris) controller designed for use with the Uniblitz AI25 Auto Iris. The AIC10 features an intuitive button array and digital user interface, allowing it to operate the iris via a modified serial command protocol. When equipped, the AIC10 will also operate the AI25’s optional high-speed shutter attachment independently from the iris. The shutter’s electronic sync allows the AIC10 to indicate the shutter’s state.
Specifications
| System Characteristics | |
|---|---|
| Repeat Shutter Exposure |
|
| Shutter Driver |
|
| Iris Drive |
|
| Power Supply |
|
| All BNC Inputs |
|
| All BNC Outputs |
|
| USB Input – Type B 2.0 |
|
| General Characteristics | |
|---|---|
| Indicators |
|
| Power Requirements |
|
| Operating Temperature |
|
| Storage Temperature |
|
| Size |
|
| Weight |
|
| Accessories Included |
|
USB Control Protocols
| Commands | Description | Decimal | HEX | Octal | Binary | ASCII |
|---|---|---|---|---|---|---|
| SHUTTER “Open” | Opens shutter | 64 | 40 | 100 | 01000000 | @ |
| SHUTTER “Close” | Closes shutter | 65 | 41 | 101 | 01000001 | A |
| SHUTTER “Trigger” | Toggles shutter state | 66 | 42 | 102 | 01000010 | B |
| SHUTTER/IRIS “Reset” | Closes shutter, opens iris | 67 | 43 | 103 | 01000011 | C |
| IRIS “Decrement” | Closes iris one position (step 1) | 68 | 44 | 104 | 01000100 | D |
| IRIS “End” | Fully closes iris | 69 | 45 | 105 | 01000101 | E |
| IRIS “Goto” | Sends iris to requested position | 71 3 | 47 3 | 107 3 | 01000111 3 | GX1X2 2 |
| IRIS “Home” | Fully opens iris | 72 | 48 | 110 | 01001000 | H |
| IRIS “Increment” | Opens iris one position (step 1) | 73 | 49 | 111 | 01001001 | I |
1 A step is equal to a single movement of the iris blades/aperture (while in the “Fine” resolution mode).
2 X1 and X2 are numerical positions of the iris where X1 is in the range of 0 to 5 and X2 is in the range of 0 to 9. See page 27 of the AIC10 User Manualfor specific aperture sizes at a given position (step).
3 These commands also require two additional characters for these commands to operate correctly and to go to your selected iris position.
