[email protected]r
tel. 042-825-7983
fax. 042-825-7984

TECH-351

TECH-351

Application fields:  materials micromachining, laser marking, photoacoustics, LIBS (laser-induced breakdown spectroscopy), DLIP (Direct Laser Interference Patterning), mass spectrometry (MALDI TOF), laser microdissection, laser-induced fluorescence, remote sensing, high technologies R&D, ablation.

Features:
-Active Q-switched mode of operation with nanosecond pulse duration
-High pulse energy and peak power
-Perfect beam quality
-Ultra-compact design
-Conductive cooling of laser head
-External / internal triggering, PC control via RS-232

 

문의하기

→ 상품 상세 정보 : TECH-351

1 Measured at 1 kHz pulse repetition rate.
2 Triggering with external electric pulse generator; generator is not included in delivery set.
3 Generation of periodical laser pulses using PC, step 0.01 kHz. Average energy may be changed by software from 10% up to maximum value.
4 Generation of periodical laser pulses at fixed rep. rate; external generator and/or PC are not required.
5 Sync Out signal is generated by pulse of laser light.
6 Depending on pulse repetition rate. Fan Heat Sink to be attached depending on operation conditions and/or pulse repetition rate operation range.

2021-05-17T09:53:27+09:00레이저 Lasers, DPSS Pulsed Laser|
Go to Top